Lexmark MS71x/MS81x & MX71x/MX81x Product Study Guide
Paper Transport System Enhancements and Changes
Base Engine Features and Updates: MS71x/MS81x & MX71x/MX81x
New Features: MS71x/MS81x & MX71x/MX81x
Flushing
This new feature will improve our customer's experience by
minimizing user interventions when getting paper jams.
The printer will attempt to automatically move undamaged
media to the output bin that would have otherwise been
jammed inside the printer, and will automatically resume
printing.
This feature is enabled by default. To disable, go to:
General Settings > Print Recovery > Jam Assist >
OFF/ON
Jam Avoidance
With the implementation of a Trailing Edge (TE) sensor and
new code algorithms, instances of getting "soft" jams and
jams caused by gap closure can be reduced.
The printer will now have the ability to hold off future picks:
- until it detects a gap between sheets
- until the previous sheet is past input sensor
- if the previous page is measured to be of
unexpected length
New Pick Arm Assembly Design
It is now a CRU maintenance item.
The two rollers are not identical in size compared to the T
series printers.
The parts are replaced as an assembly – can't replace the
individual tires anymore.
For Training Purposes Only
37
Rev 1.3
11/19/2012