LEAKS, FIRE OR OTHER DAMAGE TO THE EQUIPMENT. BE SURE ONLY TO Insert a minus screwdriver into the slots (1) in the USE ACCESSORIES MADE BY DAIKIN lower part of the remote controller (2 places), and WHICH ARE SPECIFICALLY DESIGNED remove the upper part of the remote controller.
). Refer to figure 4. Reattach the upper part of the remote controller Be careful not to pinch the wiring when attaching. Refer to figure First begin fitting from the clips at the bottom. Installation manual BRC1D517 Remote controller 4PW15195-1...
You can now proceed with connecting the remote controller to be defined as “main”. Push the “ ” button once and the present settings are SET. Push the “ ” button to return to the NORMAL MODE. BRC1D517 Installation manual Remote controller 4PW15195-1...
Page 6
“88” may be displayed in the LCD in order for the remote controller to initialize itself. 6. It is not possible to change field settings on the remote controller that is set to “sub”. Installation manual BRC1D517 Remote controller 4PW15195-1...
Page 7
High static Low static according to the connected duct resistance) pressure pressure — (for FHYK, follow the high ceiling setting) (Normal) (High ceiling) — 15(25) Drain pump operation with humidifying. Equipped — — equipped BRC1D517 Installation manual Remote controller 4PW15195-1...
Page 8
Permission level setting Level 2 Level 3 — — Leave home function Not permitted Permitted — — Thermostat sensor in remote controller (for limit Not use — — operation and leave home function only) Notes Installation manual BRC1D517 Remote controller 4PW15195-1...