Digital Connections - Kenwood KRF-X9060D Instruction Manual

Setting up the system

Digital connections

The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or standard PCM (CD)
format digital signals.
If you have connected any digital components to the receiver, be sure to read the "Input mode settings" section carefully.
COAXIAL
DIGITAL
OUT
(AUDIO)
RF digital
demodulator
(DEM-9991D)
(sold separately)
To connect an LD player with a DIGITAL RF OUT, connect the LD player to the KENWOOD RF digital demodulator (DEM-9991D).
Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver.
Connect the video signal and analog audio signals to the VIDEO 2 or VIDEO 3 jacks. (See "Connecting video components".)
12 EN
COAXIAL OPTICAL OPTICAL OPTICAL
CD/DVD VIDEO 3 MONITOR
VIDEO
2
DVD/
6CH
DIGITAL IN DIGITAL OUT
Optical fiber cable
DOLBY DIGITAL RF OUT (AUDIO)
PCM OUT
OPTICAL DIGITAL IN (AUDIO)
Optical
fiber cable
MD player
OPTICAL DIGITAL OUT (AUDIO)
Optical fiber cable
Connect the video signal and digital
audio signals to the VIDEO 3 jacks.
(See "Connecting video components".)
OPTICAL DIGITAL OUT (AUDIO)
CD or DVD player
COAXIAL DIGITAL OUT (AUDIO)
Connect the video signal and analog
audio signals to the VIDEO 2 jacks.
(See "Connecting video components".)
LD player
Component with DTS,
Dolby Digital, or PCM
OPTICAL DIGITAL OUT
!
Component with DTS,
Dolby Digital, or PCM
COAXIAL DIGITAL OUT
!
9