Convenient Functions - Kenwood KRF-X9060D Instruction Manual

Kenwood audio video surround receiver instruction manual vr-6070_krf-x9060d
Hide thumbs Also See for KRF-X9060D:
Table of Contents

Advertisement

Ambience effects

Convenient functions

STEREO
DIMMER
SOUND
STEREO
Adjusting the sound
You can make further adjustments to the sound while listening to
playback in the surround mode.
1 Press the SOUND key and then use to the M M M M M /? ? ? ? ? keys or joystick
(2/3) until the desired item appears in the display.
Each time you press the M M M M M / ? ? ? ? ? keys or Joystick (2/3), the menu
changes as follows:
Note that some items are not displayed in certain modes.
1 CNTR (Center speaker level adjustment)*
2 SR (Right surround speaker level adjustment)*
3 SBR (Surround back right speaker level adjustment)*
4 SBL (Surround back left speaker level adjustment)*
5 SL (Left surround speaker level adjustment)*
6 SUBW (Subwoofer level adjustment)*
7 INPUT (Input level adjustment - analog mode only)
8 MIDNIGHT (Midnight mode ON/OFF - Dolby Digital mode only)
9 PANORAMA (Panorama mode ON/OFF)**
0 DIMENSION (Dimension adjustment)**
- CENTER WIDTH (Center width adjustment)**
= CENTER FOCUS (Center focus adjustment)***
~ CSII DLY (Rear speaker delay adjustment)***
! CSII GAIN (Input gain adjustment)***
@ TruBass (Trubass adjustment)***
*
The adjustment is only temporary for the current input selection.
The value will return automatically to the original setup value when
the power is turned on/off or when the input selection is changed.
** Pro Logic II Music mode only.
*** CS II mode only.
2 Use the MULTI CONTROL knob or Joystick (5/∞) to adjust the
setting as desired.
• The adjustment item is displayed for approximately 8 seconds.
38
EN
MULTI CONTROL
LISTEN MODE
LISTEN MODE %/ fi
SOUND
Joystick
(MULTI CONTROL 5 / ∞,
DOWN 2 / UP3)
DIMMER
§
Midnight mode (Dolby Digital mode only)
When watching movies at night , you might not be able to raise the
volume as loud as normal. Midnight mode compresses the dynamic
range of previously specified parts of the Dolby Digital sound track (like
scenes with sudden increases in volume) to minimize the difference in
volume between the specified and non-specified parts. This makes it
easy to hear all of the sound track, even when listening at low volumes.
1 Press the SOUND key, then press the M M M M M / ? ? ? ? ? keys or Joystick (2/3)
until "MIDNIGHT" appears on the display.
• This can be selected only if CD/DVD, DVD/6CH, VIDEO 2 or VIDEO 3 is
selected as the source and the listen mode is set to "DOLBY DIGITAL."
2 Use the MULTI CONTROL knob or Joystick (5/∞) to select the
ON or OFF setting.
SP
MUTE
OPTICAL 6CH INPUT
A B
CLIP
COAXIAL
ANALOG
L
C
SW
R
LFE
SL
S
SB
SR
• The adjustment item is displayed for approximately 8 seconds.
• Some Dolby Digital software may not be compatible with the
Midnight mode.
Panorama mode (Pro Logic II Music mode only)
When listening to music, you will be able to enjoy the "wraparound"
sound effect when you adjust the panorama mode.
1 Press the SOUND key, then press the M M M M M / ? ? ? ? ? keys or Joystick (2/3)
until "PANORAMA" appears on the display.
2 Use the MULTI CONTROL knob or Joystick (5/∞) to select
PANORAMA ON or OFF.
1 PANORAMA ON : PANORAMA mode is ON.
2 PANORAMA OFF : PANORAMA mode is OFF.
SP
MUTE
OPTICAL 6CH INPUT
AUTO DETECT
A B
CLIP
COAXIAL
ANALOG
L
C
SW
R
LFE
SL
S
SB
SR
CINEMA EQ.
DTS.
STEREO
NEO:6
AUTO DETECT
DOLBY DIGITAL
ACTIVE EQ.
MATRIX
96kHzfs
DSP MODE
DISCRETE
PRO LOGIC
LOUDNESS
CSII
CINEMA EQ.
DTS.
DOLBY DIGITAL
STEREO
NEO:6
ACTIVE EQ.
MATRIX
Surround EX
PRO LOGIC
96kHzfs
DSP MODE
DISCRETE
LOUDNESS
CSII
RDS
THX
RTY
Surround EX
AUTO
MEMO
STEREO
TUNED
RDS
THX
RTY
AUTO
MEMO
STEREO
TUNED

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vr-6070

Table of Contents