Connecting The Rf Antenna And External Ir Repeater (For Vr-6070 Only) - Kenwood KRF-X9060D Instruction Manual

Setting up the system
Connecting the RF antenna and external IR Repeater
The remote control for this receiver has the RF (radio frequency) and IR (infrared rays) transmission function. IR repeaters enables you to control
components located in cabinets or behind glass doors. You can enjoy a wider remote control signal range by placing the RF antenna and IR repeater away
from the receiver.
KENWOOD components (except DVD player): System control
Other components: (Registering setup codes) IR REPEATER
(For IR Transmitter, select
"RF REMOTE OFF" only )
IR RECEIVER
(IR-9991-sold
separately)
IR OUT is free
Connecting IR repeater
1 Connect the IR repeater to the device as described in the
repeater's manual.
2 Connect the IR repeater cable(s) to the IR REPEATER OUT
jack(s).
Notes
• IR repeaters send a signal similar to the device's own remote control.
Xantech repeaters (models 282-00, 286-00, or 283-00) are compatible
with your new audio-video receiver.
Connecting the RF remote antenna
1 Insert the jack of the provided RF remote antenna into the
RF REMOTE ANTENNA jack.
2 Place the antenna wire vertically and fix it.
• Place the antenna away from the metallic panel.
IR repeaters
AC adapter
To AC wall
outlet
IR IN
(For RF Transmitter, select either
1. RF REMOTE Band 1, or
2. RF REMOTE Band 2)
(For VR-6070 only)
¡
q
IR
IR
REPEATER
RECEIVER
OUT
IN
RF REMOTE ANTENNA
Shape of plug to be connected.
IR RECEIVER IN
Stereo mini plug
Sleeve
Ring
IR IN / OUT SPECIFICATION:
Terminal IR RECEIVER
IN
To Tip Signal
To Ring Ground
To Sleeve + 8V
Monitor TV
RF antenna
IR REPEATER OUT
Mono mini plug
Sleeve
Tip Tip
IR REPEATER
OUT
Signal
Ground
19 EN