Available Listen Modes; Caution For Surround Play - Kenwood KRF-V7771D Instruction Manual

Available listen modes

44
The following table shows the relationship between the source signal, source component and receiver input, and the listen
mode that can be selected from the "Lstn(Listen) Mode" menu.
Source Signal
MPEG multi-channel
Dolby Digital (AC-3)
Dolby Digital (AC-3) RF
PCM / Analog

Caution for surround play

When playing a source component connected to the VIDEO 4 6CH. INPUT
÷ When you try to play a disc other than Dolby Digital (AC-3) or MPEG multi-channel such as DTS CD, no sound is produced or, noise may be heard.
To avoid this situation, make sure that you connect the component to the receiver's VIDEO 4 6CH. INPUT jacks through a surround processor which
can decode the surround signal you want to listen to. Connecting a DVD player which can decode the surround signal itself is also acceptable.
Caution when the "Lstn Mode" is set to "(digital) Manual"
(See also ª for selecting digital auto or digital manual. )
When the "Input Digital" icon is set to "Manual", you need to pay attention of what kind of audio signal comes in and which
listen mode you need to select.
Playback in MPEG mode
Remote control display
Input
Signal
Selected Lstn Mode
MPEG MPEG
Dolby Digital MPEG
PCM MPEG
Playback in Dolby Digital mode
Remote control display
Input
Signal
Selected Lstn Mode
MPEG Dolby Digital
Dolby Digital Dolby Digital
PCM Dolby Digital
Playback in PCM mode
Remote control display
Input
Signal
Selected Lstn Mode
MPEG *2
Dolby Digital *2
PCM *2
*2 The listen mode in the table in "Available listen modes".
÷ The selection of the "Surround" icon may be restricted depending on the input signal.
÷ "(digital) Manual" is switch to "(digital) Auto" when:
the system is switched to On or Off, speaker sysem is switched to On or Off, and the analog input is selected after "Digital Manual" playback.
÷ Use the "(digital) Manual" mode when playing a 2/0 (2 channel or 2.1channel) Dolby Digital(AC-3) or MPEG input in the Pro Logic or 3 Stereo
listen mode.
If "(digital) Auto" is selected in this situation, some operations of source components may cancel the Pro Logic or 3 Stereo listen mode.
Receiver Input
Source Component
Digital
DVD
Digital
DVD
Digital
LD (DEMODULATOR)
Digital / Analog
CD / LD / DVD etc.
Panel MPEG
Indicator
Status
MPEG Lights
Dolby Digital Blinks
PCM Blinks
Panel
Dolby Digital
Status
Indicator
MPEG Blinks
Dolby Digital Lights
PCM Blinks
Panel
Dolby Digital/
Status
MPEG indicator
MPEG Off
Dolby Digital Off
PCM Off
Listen Modes That Can be Selected from
"Lstn Mode" menu
MPEG / Stereo
Dolby Digital / Stereo
Dolby Digital / Stereo
Pro Logic / 3 Stereo / Stereo / DSP mode
*1 When the Dolby Digital (AC-3) and MPEG signal has 2 or 2.1
channels, it can be played using Pro Logic or 3 Stereo mode.
What happens
Sound comes out
No sound See the table in "Available listen modes".
No sound See the table in "Available listen modes".
What happens
No sound See the table in "Available listen modes".
Sound comes out
No sound See the table in "Available listen modes".
What happens
No sound See the table in "Available listen modes".
No sound See the table in "Available listen modes".
Sound comes out
Ambience effects
KRF-V7771D (En/T)
*1
*1
*1
!
Solution
Solution
Solution