Manual Memory Of Broadcast Stations; Receiving A Manually Preset Station - Kenwood KRF-V7771D Instruction Manual

Manual memory of broadcast stations

Apart from the auto memory function, RDS stations can also be stored manually in the preset memory. Other stations than the RDS
stations can also be stored in memory after the Auto Memory of RDS stations.
1
Select the "Tuner" input and select a station.
Main
Menu
Phono CD1 CD2
TV1 TV2 Video1 Video2 Video3
3
Tuner
Freq.
FM 108.00MHz
Auto Band
RDS Direct
2
Preset the selected stations.
Memor y /10ke y Pad
Memor y
Auto Memor y
÷ If RDS stations are stored manually in the preset memory, the PS
may not be included in the memory depending on receiving
conditions.

Receiving a manually preset station

1. Preset -Call
Tuner
Freq.
FM 108.00MHz
Auto Band
RDS Direct
2. Specifying the preset number
Memor y /10ke y Pad
Memor y 1 2 3
Auto Memor y
1
MD/ CD2/ Input Input
Tape1 Tape2 Digital Analog
Tuner
Remote
Macro
Mode
Video4 AV AUX
P.Call
11ch
Memor y /
10ke y Pad
4
2
1
1 2 3
1-ch
4 5 6
7 8 9
2
0 +10
P.Call
11ch
Memor y /
10ke y Pad
1
11ch
4 5 6
7 8 9
2
0 +10
1 Select the "Tuner" icon.
÷ The last tuned frequency is displayed.
2 Select the receiving band.
Select the "Band" icon.
3 Select a station or frequency.
Select the " "or " " icon.
4 Select the "Memory/10key Pad" icon.
1 Select "Memory" icon.
÷ The memory mode (
) and preset call mode (
Memor y
switched alternately every time the icon is selected.
2 Select one of the preset numbers from 1 to 40.
Select numeric icons as follows...
To preset in "15" ......... 05
÷ Repeat steps 1 and 2 for each of the stations to be stored in
memory.
÷ In the manual memory storage operation of radio stations, it may take
a few seconds after the "Memory" icon is selected till the memory
display starts to blink depending on the receiving condition.
÷ If a station is stored in a preset number which has already stored
a station memory under it, the previous memory is replaced by the
new memory content.
Select the " "or " " icon of "P.Call" to select a preset number.
When " " icons are selected
P.Call
When " " icons are selected
P.Call
÷ Every time the icon is selected, the next station in the order of the
preset number is received.
If the icon is held selected ... Preset stations will be received suc-
cessively for about half a second each.
1 Select the "Memory" icon and switch to preset call mode
( ).
Memor y
2 Select the preset number (up to 40) of the desired preset
station.
Select numeric icons as follows...
To receive in "20" ....... 00)
÷ If you made a mistake in entering the figure of 10, select the 0
icon repeatedly until the original display is shown, then enter the
correct number.
RDS (Radio Data System)
KRF-V7771D (En/T)
) are
Memor y
......
01 02 03 38 39
......
01 02 03 38 39
39
40
40