Kenwood KRF-V7771D Instruction Manual page 29

Playback of digital input / playback of analog input
Switch the input setup of the receiver to "Input Digital" or "Input Analog" according to whether the input signal from the source
component is digital or analog.
Main
Menu
Phono CD1 CD2 Tuner
Video1 Video2 Video3
TV1 TV2
In p ut Sound Status
In p ut Si g nal
PCM
Auto
Main
Menu
Phono CD1 CD2 Tuner
TV1 TV2 Video1 Video2 Video3
In p ut Sound Status
In p ut Si g nal
Analo g
Auto
Input Digital
MD/ CD2/ Input Input
Tape1 Tape2 Digital Analog
Remote
Macro
Mode
Video4 AV AUX
Input Analog
MD/ CD2/ Input Input
Tape1 Tape2 Digital Analog
Remote
Macro
Mode
Video4 AV AUX
To play a digital input
Select the "Input Digital" icon.
The display is alternated every time the "Input Digital" icon
is selected.
Auto += Manual
÷ The type of the signal being played (PCM, etc.) is shown in the
"Input Signal" display.
÷ When "Auto" is selected, the playback is switched automatically
according to the input signal type from the source components.
Select "Auto" for normal use.
÷ When "Manual" is selected, the listen mode is fixed. Select a
desired listen mode.
÷ If the digital input is not connected to the receiver, select "Input
Analog".
To play an analog input
Select the "Input Analog" icon.
÷ "Analog" is shown in the "Input Signal" display.
Playing music
KRF-V7771D (En/T)
29