Kenwood KRF-V7771D Instruction Manual page 54

54
Memory backup function
Please note that the following items will be deleted from
this unit's memory if the power cord is disconnected
from the AC outlet or the POWER switch is turned off for
approximately three days.
÷ The input selection is cleared and the "Tuner" input is selected.
÷ The volume setting is cleared and the volume is set to "-66 dB".
÷ The receiving band setting is cleared and the "FM" band is
selected.
Setup Codes chart
Although each setup code is designed to work with a number of different models, certain codes may not work with some
models. (Also, certain codes may only operate some of the functions available on a given model.)
With some models, be sure to keep the ENTER key pressed for a while.
Inquiries on the setup codes loaded using the Free-Phone Consumer Help Line:
If there is any inquiry related to these setup codes, please contact the following services.
UK (including N. Ireland) : 0800-898520
÷ The frequency setting is cleared and 87.5 MHz is selected.
÷ The preset station memory is cleared.
÷ The surround setting is cleared and reset to the initial condition.
In case of difficulty
KRF-V7771D (En/T)