Set The Date And Time - Mercedes-Benz Comand Operator's Manual

List of languages:
• "Adopt from Instrument Cluster" – the system will
use the same language as is set in instrument
cluster
• "Deutsch"
• "English (metric)" – distance measured in km,
speed in km/h
• "English (imperial)" – distance measured in yards,
miles, speed in mph
• "Español"
• "Français"
• "Italiano"
• "Nederlands"
System settings
Introduction Audio Telephone

Set the date and time

COMAND is equipped with an integrated clock. Press
to display the current time. The clock is used e.g.
for indicating the estimated time of arrival at the
destination, page 181.
There are several ways to set the time:
• With GPS reception, page 232
Set the time in 30 minute steps, page 233
Set the time by selecting a country and the time
zone, page 234
• Without GPS reception, page 232
Set the date and time manually, page 236
Note:
The clock must always be reset if the COMAND
system was disconnected or if the vehicle battery
was discharged.
231
Navigation
Info Services and
system settings
Index