Setting Date And Time - Mercedes-Benz Comand Operator's Manual

Info Services*/System settings
System settings
You can select the following languages
"Adopt from Instrument Cluster"
COMAND will use the same language
as is set in instrument cluster
"Deutsch"
"English" (metric)
Distance measured in km,
speed in km/h
"English" (imperial)
Distance measured in yards and miles,
speed in miles per hour (mph)
"Español"
"Français"
"Italiano"
"Nederlands"
208

Setting date and time

COMAND is equipped with an integrated
clock, which it shows in the main system
settings menu.
i
The clock displays e.g. the estimated
time of arrival at the destination during
route guidance.
Automatically
COMAND automatically sets date and time
if the GPS time is received.
However, you can make the following ad-
justments:
Set the time in increments of 30 minu-
tes ( page 209)
Set the time by selecting a country and
the time zone ( page 210)
Manually
You must always set the clock manually
( page 213), if
COMAND does not receive a GPS time
the clock has been disconnected from
the vehicle battery
the dates of the change between sum-
mer and winter time are not available