Entering The Vehicle Position - Mercedes-Benz Comand Operator's Manual

ntroduction
nter the vehicle position estination memory

Entering the vehicle position

It is only necessary to enter the vehicle position when
the system is not able to position itself automatically
with the GPS.
It is only possible to enter the vehicle position in
connection with a crossroad.
Use the rotary/pushbutton
field "Settings" in the main destination input menu and
confirm by pressing.
In the "Settings" menu (page 221) use the rotary/
pushbutton to select the menu field "Location...".
This activates the menu for entering the location.
Now enter the city/suburb and street in the menu and
select the required entries from the respective lists.
See page 152 for how to enter a destination address.
After you have selected the street, you will see a
prompt for the intersection. Highlight the appropriate
cross street with the rotary/pushbutton
by pressing.
Audio Telephone
to highlight the menu
and confirm
Navigation
220
Set the vehicle's current position in the following
menu.
Actual position is in front of a junction:
Turn the rotary/pushbutton
Actual position is behind a junction:
Turn the rotary/pushbutton
Press the rotary/pushbutton
position. The message "Chosen location accepted" will
be displayed and will automatically disappear in
3 seconds.
Info Services and
system settings
P82.85-2667-26
to the right.
to the left.
to accept selected
Index