Mercedes-Benz Comand Operator's Manual page 168

Introduction
Destination input
Altering the map scale
8
Display of the scale bar is activated by either one of two
actions:
• Press or
• Press the rotary/pushbutton
8 Current map scale
9 Scale bar, 13 different scales are available from
0.05 mi/inch to 500 mi/inch
10 New scale
11 Square frames enlarged section of the map
Audio Telephone
11
10 8 9
P82.85-7739-26
.
Navigation
166
Increase the map scale (activates more detailed map):
Press and turn the rotary/pushbutton
left. A square will appear around the cross-hairs, it
indicates the new map section.
Reduce the map scale (activates a less detailed map):
Press and turn the rotary/pushbutton
right. Press the rotary/pushbutton
the new map section. This will take place automatically
after 8 seconds.
Note:
To select destinations which are not directly located in
the vicinity of the map section on the screen, it is
advisable to access the overview map. Then use the
number keys to position the cross hairs near the
destination. Now switch to the detail map and move the
cross hairs to your desired destination.
Confirming destination:
Once the cross hairs mark the desired destination,
press the rotary/pushbutton
Then select the route calculation mode and calculate
your route, page 175.
Info Services and
system settings
to the
to the
briefly to calculate
longer than 2 seconds.
Index