Repeating Tracks - Mercedes-Benz Comand Operator's Manual

Introduction
Tape operation

Repeating tracks

Use the rotary/pushbutton
"Settings" menu field and press it to confirm your
selection. The Settings menu will now appear.
Press the rotary/pushbutton
activate the "Repeat" function (a checkmark will
appear).
There are three ways to return to the tape menu:
• automatic return after 8 seconds
• press
Audio Telephone
P82.85-6224-26
to highlight the
to highlight and
Navigation
48
• hold the rotary/pushbutton
2 seconds
"RPT" will appear below the side display when this
function is active.
Notes:
The current track will be repeated continuously after it
has played through once.
The "Repeat" function may not work properly if:
• there is not enough blank tape between the indi-
vidual tracks,
• there is interference noise on the blank tape
between the tracks,
• the system does not clearly recognize the end or
beginning of a track.
To switch off the function:
In the menu "TAPE Settings" highlight the function
"Repeat" with the rotary/pushbutton
by pressing (no checkmark).
Info Services and
system settings
longer than
and confirm
Index