Entering The Vehicle Position - Mercedes-Benz COMAND Operator's Manual

Introduction Audio
Destination memory Enter the vehicle position

Entering the vehicle position

It is only necessary to enter the vehicle position when
the system is not able to position itself automatically
with the GPS.
It is only possible to enter the vehicle position in
connection with a crossroad.
Use the right-hand rotary/pushbutton
the menu field "Settings" in the main destination input
menu and confirm by pressing.
In the "Settings" menu (page 201) use the right-hand
rotary/pushbutton
tion...". This activates the menu for entering the
location.
Now enter the city/suburb and street in the menu and
select the required entries from the respective lists.
See page 141 for how to enter a destination address.
After you have selected the street, you will see a
prompt for the intersection. Highlight the appropriate
cross street with the right-hand rotary/pushbutton
and confirm by pressing.
Telephone
to highlight
to select the menu field "Loca-
Info Services and
Navigation
system settings
200
Set the vehicle's current position in the following
menu.
Actual position is in front of a junction:
Turn the right-hand rotary/pushbutton
Actual position is behind a junction:
Turn the right-hand rotary/pushbutton
Press the right-hand rotary/pushbutton
selected position. The message "Chosen location
accepted" will be displayed and will automatically
disappear in
3 seconds.
Index
P82.85-2667-26
to the right.
to the left.
to accept