Connecting Video Components; Connecting Dvd 6-Channel Jack; Connecting The Antennas - Kenwood KRF-V5020 Instruction Manual

Connecting video components

SUB
WOOFER CENTER
REC OUT PLAY IN PLAY IN
FRONT SURROUND
VIDEO 2 / MONITOR VIDEO 1 DVD 6CH. INPUT
Video Inputs
(Yellow RCA
pin cord)
VIDEO IN
DVD player or LD player
OUT
Video deck
OUT
IN
Audio inputs and outputs
(Red and white RCA pin cords)

Connecting DVD 6-channel jack

SUB
WOOFER CENTER
FRONT SURROUND
DVD 6CH. INPUT
FRONT
SURROUND
SUBWOOFER
DVD player equipped with
six channel output jacks, etc.
The sound input to DVD 6CH. INPUT is paired with the video signal
input to 6CH. INPUT.
VIDEO 1
VIDEO 2
MONITOR
VIDEO 2
VIDEO OUT VIDEO IN
Monitor TV
OUT
IN
OUT
Video inputs and outputs
(Yellow RCA pin cords)
6CH. INPUT
VIDEO 1
VIDEO 2
MONITOR
VIDEO 2
VIDEO OUT VIDEO IN
CENTER
VIDEO OUT
SUB
WOOFER CENTER
MONITOR
FRONT SURROUND VIDEO 2
DVD 6CH. INPUT VIDEO OUT
CENTER
FRONT
SURROUND
SUBWOOFER
Multi-channel surround
processor
DVD player

Connecting the antennas

Antenna terminal connections
1 Push lever. 2 Insert cord.
AM loop antenna
The supplied loop antenna is for use indoors. Place it as far as possible from
the receiver, TV set, speaker cords and power cord, and adjust the direction
for best reception.
FM indoor antenna
The supplied indoor antenna is for temporary use only. For stable signal
reception we recommend using an outdoor antenna. Disconnect the indoor
antenna when you connect one outdoors.
FM outdoor antenna
Lead the 75 coaxial cable connected to the FM outdoor antenna into the
room and connect it to the FM 75
ANTENNA
AM
GND
FM
75
Use an antenna adaptor
(Commercially available)
Setting up the system
KRF-V7020/V6020/V5020 (En/T)
Even if your DVD player does not
have the 6-channel output facility,
you can enjoy the 6-channel audio
by connecting a multi-channel
surround processor to your DVD
player.
6CH. INPUT
VIDEO 1
VIDEO 2
VIDEO IN
VIDEO OUT
3 Return lever.
terminal.
AM loop
antenna
FM indoor antenna
FM outdoor antenna
9