Setup Code Chart - Kenwood KRF-V5020 Instruction Manual

Remote control unit (RC-R0710)
1 Numeric keys
If CD or MD is selected as the input source,
these keys function as numeric keys. If
tuner is selected as the input source, these
keys are used to call up station presets.
2 Component operation keys
Use these keys to operate other compo-
nents with system control connections to
the receiver.
2 key
If tape is selected as the input source, this
key functions as the play key for side B of
the cassette (the side facing away from
the front of the deck).
BAND (6) key
If tuner is selected as the input source, this
key functions as the band selector key.
If CD is selected as the input source, this
key functions as the play/pause key.
If MD is selected as the input source, this
key functions as the play key.
DISC SKIP, A/B, +100 key
If CD is selected as the input source, this key
functions as the multi-CD player disc skip
key.
If TAPE is selected as the input source,
this (A and B) of a double cassette deck.
1 2
1
4 5
7 8
2 6
2
BAND
1 TUNING ¡
LISTEN MULTI CONTROL
MODE VOL.UP
3
TITLE
4
SOUND
5
SUB TITLE
VOL.DOWN
6
PTY TA/NEWS DISPLAY
MD/TAPE TUNER
DVD CONT VIDEO 1
7
REMOTE CONTROL UNIT
RC-R0710
AUTO (7)key
If tuner is selected as the input source, this
key functions as the AUTO key.
If CD or MD is selected as the input source,
this key functions as the stop key.
TUNING (1 ¡) keys
If tuner is selected as the input source,
these keys function as tuning keys.
If CD or MD is selected as the input source,
these keys function as search keys.
P.CALL (4 ¢) keys
If tuner is selected as the input source,
these keys function as P.CALL keys.
If CD or MD is selected as the input source,
&
these keys function as skip keys.
3 LISTEN MODE, TITLE key
Use to select the listening mode.
4 MUTE, ENTER key
Use to temporarily mute the sound.
5 SOUND key
Use to adjust the sound quality and ambi-
ence effects.
6 MULTI CONTROL key
Used to make a variety of settings.
3
POWER
6 0
9 +10
7
DISC SKIP
AUTO A/B +100
4 P.CALL ¢
S.DIRECT
MENU
MUTE
ENTER
SET UP
OSD
CD PHONO
VIDEO 2/ DVD/
MONITOR 6 CH INPUT
&
&
(
£
^
¢
Names and functions of parts
KRF-V7020/V6020/V5020 (En/T)
8
9
0
!
@
#
7 DVD CONT keys
Used to operate DVD player.
While holding this key depressed, press
any of the keys masked in gray in the
above illustration to operate the corre-
sponding function of a DVD player from
KENWOOD.
Keys 3, 4, 5, 9 and ! are given the
following functions during the DVD player
control operation.
3 :TITLE
4 :ENTER
5 :SUB TITLE
9 :MENU
! :OSD
For details, refer to the instruction manual
of your DVD player.
8 POWER key
Use to switch the power ON/STANDBY
when the POWER is turned ON.
9 SOURCE DIRECT key
0 VOLUME CONTROL key
! SETUP key
Use to select the surround sound settings.
@ RDS operation keys
Use to receive RDS broadcasts.
# Input selector keys
Use to select the receiver's input source.
7
#
^
#
%