Presetting Radio Stations Manually; Receiving Preset Stations; Receiving Preset Stations In Order - Kenwood KRF-V5020 Instruction Manual

Presetting radio stations manually

The RDS auto memory function assigns preset numbers to RDS
stations starting from preset number "1". Therefore, be sure to execute
the RDS auto memory function before using the following operations to
manually store AM stations and other FM stations, and RDS stations.
"Presetting RDS stations (RDS AUTO MEMORY)".
1
Tune to the station you want to store.
2
Press the MEMORY key while receiving the station.
Proceed to step 3 within 5 seconds.
(If more than 5 seconds elapse, press the MEMORY key again).
• When storing radio stations manually, it may take a few seconds
before the "MEMORY" indicator appears in the display after pressing
the MEMORY key depending on receiving conditions.
Blinks for 5 seconds
0 1
SP A
3
Use the MULTI CONTROL to select one of the station
presets (1 – 30).
4
Press the MEMORY key to accept the setting.
• Repeat steps 1, 2, 3 and 4 to store as many stations as
necessary.
• If you store a station at a previously used preset, the old station will
be replaced by the new one.

Receiving preset stations

AUDIO
1-0, +10
1-0, +10
RC-R0508
1
Use the remote control to select the tuner as the source.
• The remote control switches to the tuner operating mode.
MEMORY
MULTI CONTROL
Lights for 5 seconds
8 )) 9 .
FM
STEREO
MHz
TUNER
RC-R0710
2
Enter the number of the preset you want to receive (up to
"30").
Press the numeric keys in the following order:
*
For "15", press .......... 0,5
For "20", press .......... 0,0,)
• If you make a mistake entering a two digit number, press the +10
key several times to return to the original display and start again.
SP A

Receiving preset stations in order

AUDIO
P.CALL
AUTO
MEMO.
RC-R0508
ST.
TUNED
1
Use the remote control to select the tuner as the source.
• The remote control switches to the tuner operating mode.
2
Use the P.CALL key to select the desired station.
• Each time you press the key, another preset station is received in
order.
Pressing the P.CALL (%) key (¢) does the following:
01=02=03= ...... 28=29=30=01=02=03=
Pressing the P.CALL (fi) key (4) does the following:
01+02+03+ ...... 28+29+30+01+02+03+
Holding down the key, lets you skip through the presets, receiv-
ing each for 0.5 seconds apiece.
Listening to radio broadcasts
KRF-V7020/V6020/V5020 (En/T)
1 5 8 )) 9 .
FM
STEREO
MHz
(P.CALL)
P.CALL
TUNER
RC-R0710
19
AUTO
MEMO.
ST.
TUNED