Preparing For Use; Connecting The Attachments - Philips HP4696 User Manual

Do not connect the handle to the mains without attaching an
attachment first. Make sure the attachment is properly fixed to
the handle before you put the plug in the wall socket.
Keep the attachments clean and free of dust, dirt, styling spray
and gel. Never use the appliance in combination with styling
mousse, styling spray, gel etc.
The attachments have a ceramic coating. This coating will wear in
the course of time. When this happens, the appliance will still
function normally.
The ceramic-coated parts of the attachments will become hot
during use. Prevent contact with the skin. Do not allow the
mains cord to touch any hot parts.
Keep the appliance out of the reach of children.
Only use the appliance on dry or damp hair.
Always unplug the appliance after use.
Wait until the appliance has cooled down before storing it.
Do not wind the mains cord round the appliance.

Preparing for use

Before you start styling, comb or brush the hair so that it is
untangled and smooth.

Connecting the attachments

1 Insert one of the attachments into the handle. Make sure that the
stand is pointing downwards (fig. 1).
2 Turn the locking ring on the handle to the right until the bold
arrow on the locking ring is in line with the arrow on the handle.
The attachment is now securely fixed to the handle (fig. 2).
Follow this procedure for all attachments. To detach the
attachments, turn the locking ring to the left and pull the
attachment out of the handle.
Unplug the appliance when you remove an attachment after or
during styling. Avoid touching the metal and ceramic parts of the
attachment, as they are hot.
ENGLISH
7