Hotspot - TP-Link CPE210 Installation Manual

• Hotspot

Hotspot application is used to provide Internet access for wireless
devices such as smartphones, tablets and laptops.
If the CPE is connected to a router, we recommend setting it in the
Access Point mode.
Internet
Router Access Point
Refer to the following steps to configure the CPE.
Configure the Access Point
1. Log in to PharOS
2. Go to the Quick Setup page
3. Operation Mode
• Select 'Access Point' .
• Click 'Next' .
4. LAN Settings: Click 'Next' .
5. WAN AP Settings
• SSID: customize the name for the network as you like.
• Security: select 'WPA-PSK/WPA2-PSK' .
• PSK Password: create the password for the network as you like.
• Click 'Next' .
6. Finish: Click 'Finish' .
15
Smartphone
Laptop
Tablet