Smeg ALFA 150 User Instructions page 10

5.3 Editing / saving a program
The oven has 39 programs that can be modified by the user (from P01 to P39).
To set the operating parameters of a program:
1 Turn the knob to the
save/edit.
2 Keep the "PUSH" knob pressed for 3 seconds: the display will show the
cooking temperature.
3 Turn the knob to the
4 Press the "PUSH" knob: the display will show the cooking time.
5 Turn the knob to the
1 to 99 min or INF infinite).
6 Press the "PUSH" knob to exit from the data setting and saving phase. The
message "PEnd" will appear on the display and the parameters will be
saved.
7 After 3 seconds the display will show the parameters set in rotation.
8 To return to the "OFF" status keep the "STOP" button pressed for 4 seconds.
5.4 Running a program
From the "OFF" status proceed as follows:
1 Turn the knob to the
from P01 to P39. The display will show the parameters of the selected
program in rotation.
2 To start the program press the "START" button. The appliance will perform a
preheating cycle, showing the text "PrEh" on the display.
3 When preheating is finished, a series of buzzers lasting 3 seconds will
indicate that it is possible to proceed with the cooking operation. The text
"PrEh" will flash on the display.
4 To start cooking, keep the "START" button pressed for 2 seconds. The
display will show the set parameters in sequence, the time remaining until
the end of cooking and the program selected.
5 It is possible to start cooking early before the preheating temperature is
reached, by keeping the "START" button pressed for 3 seconds.
6 During the last minute of cooking, only the countdown of the remaining 60
seconds will be displayed. At the end, a buzzer will sound and the flashing
"End" text (for 20 minutes) will indicate that cooking has been completed.
7 To return to the "OFF" status keep the "STOP" button pressed for 4 seconds.
32
Instructions for the user
or
or
or
or
symbol to select the program you wish to
symbol to set the cooking temperature.
symbol to set the cooking duration time (from
symbol to select one of the available programs