Smeg ALFA 150 User Instructions page 16

Instructions for the user
6.4 Cleaning and disassembling the door glazing
To facilitate cleaning, it is possible to remove the door (see 7.2 Removing the
door) and place it on a canvas, or open it and lock the hinges in order to extract
the glass panels.
The glass panels of the door can be completely removed by following the
instructions provided below.
1 Removing the internal glass panel:
Remove the internal glass panel by pulling
it upwards, following the movement
indicated by the arrows. Doing this
detaches the 4 pins attached to the glass
from their slots in the oven door.
2 Cleaning:
It is now possible to clean the external
glass panel and the panels removed
previously. Use absorbent kitchen roll. In
case of stubborn dirt, wash with a damp
sponge and neutral detergent.
3 Replacing the glass panels:
Replace the internal glass panel, taking
care to centre and insert the 4 pins
attached to the glass into their slots in the
oven door by applying slight pressure.
Attention: before removing the glass panels, make sure that the door's hinges
have been locked in the open position as described in "7.2 Removing the door".
This operation may have to be repeated during the glass removal process if the
door is accidentally freed.
38