A7. MANUAL TEST
The built-in noise generator of DSP outputs the test noise or test tone through the channels specified by using the sub-
menu.
The noise frequency for LFE is 30 to 80 Hz. Other than that, the noise frequency is 500 to 2 kHz.
The tone frequency for LFE is 50 Hz sine wave. Other than that, the tone frequency is 1kHz sine wave.
A7-1. TEST ALL
The test noise is output from all channels.
A7-2. TEST FRONT L
The test tone is output from FRONT L channel.
A7-3. TEST CENTER
The test tone is output from CENTER channel.
A7-4. TEST FRONT R
The test tone is output from FRONT R channel.
A7-5. TEST SURROUND R
The test tone is output from SURROUND R channel.
A7-6. TEST SURROUND BACK R
The test tone is output from SURROUND BACK R channel.
A7-7. TEST SURROUND BACK L
The test tone is output from SURROUND BACK L channel.
A7-8. TEST SURROUND L
The test tone is output from SURROUND L channel.
A7-9. TEST FRONT PRESENCE L
The test tone is output from FRONT PRESENCE L channel.
A7-10. TEST FRONT PRESENCE R
The test tone is output from FRONT PRESENCE R channel.
A7-11. INVALID ITEM
Not for service.
A7-12. INVALID ITEM
Not for service.
A7-13. TEST LFE 1
The test tone is output from LFE 1 (SUBWOOFER 1) channel.
A7-14. INVALID ITEM
Not for service.
RX-V667/HTR-6063/RX-A700
35