Multi Channel Input; Mic Check; Channel Input 8 Ohms; Channel Input 6 Ohms - Yamaha RX-V667 Service Manual

RX-V667/HTR-6063/RX-A700
INPUT: AV5 ANALOG
SPEAKER OUT: 1 kHz, SUBWOOFER OUTPUT: 50 Hz
Sub-memu Input level
BI-AMP Both ch, -20 dBm
ZONE/TONE=MAX Both ch, -20 dBm
ZONE/TONE=MIN Both ch, -20 dBm
INVALID ITEM
Both ch, -20 dBm
(Not for service)
INVALID ITEM
Both ch, -20 dBm
(Not for service)
D-PARTY MODE Both ch, -20 dBm
FULL MUTE Both ch, -20 dBm
INVALID ITEM
Both ch, -20 dBm
(Not for service)
INVALID ITEM
Both ch, -20 dBm
(Not for service)
A5. MULTI CHANNEL INPUT
This menu is used to check the route of audio signal input to MULTI CHANNEL INPUT.
A5-1. 8 CHANNEL INPUT 8 ohms
The audio signal input to MULTI CHANNEL INPUT is output with the speaker impedance "8 ohms" setting.
A5-2. 8 CHANNEL INPUT 6 ohms
The audio signal input to MULTI CHANNEL INPUT is output with the speaker impedance "6 ohms" setting.
A6. MIC CHECK
A6-1. MIC ROUTE CHECK
The signals input through the YPAO microphone are output to only FRONT L channel via A/D-D/A.
34
Volume
FRONT CENTER
+6.5 dB +13.0 dBm +13.0 dBm
+6.5 dB +13.0 dBm +13.0 dBm
+6.5 dB +13.0 dBm +13.0 dBm
+6.5 dB – –
+6.5 dB – –
+6.5 dB +13.0 dBm +13.0 dBm
+6.5 dB - ∞ - ∞
+6.5 dB – –
+6.5 dB – –
SPEAKERS OUTPUT
SURROUND
SURROUND
BACK
+13.0 dBm +13.0 dBm
+13.0 dBm - ∞
+13.0 dBm - ∞
– –
– –
+13.0 dBm - ∞
- ∞ - ∞
– –
– –
SUB-
PRESENCE/ WOOFER
ZONE2 OUTPUT
- ∞ -6.5 dBm
+13.0 dBm -6.5 dBm
+13.0 dBm -6.5 dBm
– –
– –
+13.0 dBm -6.5 dBm
- ∞ - ∞
– –
– –