Shroud Removal - Precor Experience Strength General Safety & Maintenance Manual

Shroud Removal

The Experience Strength product line includes a shroud that must
be removed to perform the maintenance described in this manual.
Use the following instructions to remove the shroud:
1. Grasp the back of the Top Cover with both hands near the
middle.
2. Apply upward pressure to remove the Top Cover.
Note: It may help to use your palms to push forward on the top of
the Upper Back Shroud while pushing up on the Top Cover.
3. Pull the Upper Back Shroud up and away from the unit to
remove it.
Figure 1: Removing the Top Cover
General Safety and Maintenance Manual: Before You Begin
Perform the necessary maintenance. When you are finished,
replace the shroud.
4. Attach the Upper Back Shroud first, aligning the tabs at the
bottom with the Lower Back Shroud.
Note: Make sure the clips at the top of the Upper Back Shroud
snap securely to the Weight Stack Frame.
5. Attach the Top Cover, making sure the Top Cover snaps securely
into place.
6