Figure 3: Cable bolt must have a minimum of ten threads into the selector
stem
Check Warning and Instructional Labels
Inspect warning and instructional labels daily to make sure that all
the information can be clearly read. If any portion is not visible or
part of the label is not adhered properly, replace that label
Obtaining Service
immediately (refer to
Clean labels as needed with a mild soap and water solution in a
spray bottle, and dry thoroughly with a soft cloth.
General Safety and Maintenance Manual: Daily Inspection
for purchase information).
Figures 4 and 5 show an example of user instructional labels.
Figure 4: Sample user instructional label for the Experience Strength
C-Line
10