Lubricate Pop Pins; Check And Lubricate Ratcheting Seat Lever - Precor Experience Strength General Safety & Maintenance Manual

Lubricate Pop Pins

Pull out the pop pin as far as it goes and apply a small amount of
silicone spray lubricant. Wipe off any excess lubricant with a rag.
(Refer to Figure 12.)
CAUTION: Pulling out the pop pin may cause the unit to suddenly
adjust position. To avoid injury, keep your hands and head away
from moving parts.
Test the pop pin for proper function and engagement in each
adjustment hole.
Diagram 12: Lubricate the pop pin by pulling it out
General Safety and Maintenance Manual: Monthly Inspection
Check and Lubricate Ratcheting
Seat Lever
Precor designed the ratcheting seat so users can easily move the
seat to a comfortable position. After lowering the seat by pressing
on the lever to disengage, a user can sit on the seat and pull it up to
the desired position. As the seat moves, the ratcheting lever snaps
in and out of each hole, making an audible noise.
The ratcheting seat requires little maintenance. However, because
seat safety is important to the safety of a workout, you should
check the ratcheting seat lever each month to see if it sticks when
used. You also want to ensure that the pin fully engages in each
adjustment hole.
To test if the seat lever needs lubrication, slightly elevate the seat
while pressing and releasing the lever. The lever should snap back
out easily. If the lever sticks, lubricate the pivot pin in the lever with
silicone spray lubricant. Wipe off any excess lubricant with a rag.
(Refer to Figure 13.)
19