Monthly Inspection; Inspect Frames And Movement Arms - Precor Experience Strength General Safety & Maintenance Manual

Monthly Inspection

Each month, the following tasks should be performed to maintain
the equipment. Choose the appropriate tasks based on what you
are maintaining.

• Inspect frames and movement arms.

• Lubricate pop pins.
• Check and lubricate ratcheting seat lever.
• Inspect all fasteners.
• Inspect gas shocks for leaks.
Inspect Frames and Movement Arms
Inspect frames and movement arms monthly for proper function
and integrity. Check for cracks, chipped paint, or rust. Touch up
dings and chips in the paint as needed. Replace any component at
first signs of wear.
Note: You can order touch-up paint from Precor by calling Customer
Support. Refer to Obtaining Service.
Inspect frames for cracks particularly at the joints. If any cracks
are found, immediately take the equipment out of service, and
repair it using a qualified maintenance technician. Refer to
Important Safety Guidelines
General Safety and Maintenance Manual: Monthly Inspection
Obtaining Service
and .
To remove surface rust from the frame, rub lightly with a fine wet/
dry sand paper or fine steel wool. Finish with Precor's touch-up
paint if needed. Maintain paint luster with an application of a mild
automotive wax product.
To maintain the powder coated and chrome parts, use a mild
detergent-based cleaner for light dirt and grime removal. For
removing heavier dirt and grease and for polishing, use a good car
polish. For scuffs and marks that are not removed by the above
methods, use a soft scrub cleanser. Do not use solvents, lacquer
thinner, acetone, or finger nail polish remover. For high wear areas,
ABS shields have been provided. Replacement shields are available
from Precor.
18