Setting Of The Flow Selector - AirSep FreeStyle Patient Manual

EN
Do not operate FreeStyle without the air intake filter in place. If a
second filter is provided, insert the "replacement" filter before you
clean the dirty filter.
Use only AirSep Part No. FI144-1 as the air intake filter for this
unit.

Setting of the Flow Selector

The FreeStyle unit has three pulse flow settings: [1], [2], and [3], providing flows
equivalent to 1-3 LPM oxygen. Lift the dust cover on the unit's keypad, and press
the [1], [2], or [3] button, which corresponds to the oxygen pulse flow that your
physician has prescribed. (See Figures 23 and 24.)
EN-28
Figure 23: Lifting Dust Cover on Keypad Display
FreeStyle™
®
AirSep Corporation
MN131-1 rev. B - 02/13