Icom IC-F3021T/S Instruction Manual page 24

4
BATTERY CHARGING
D AD-106 installation
The AD-106
charger adapter
BC-119N or BC-121N before battery charging.
➥ Connect the AD-106
119N/BC-121N as below, then install the AD-106 into the
holder space of the BC-119N or BC-121N with the sup-
plied screws.
AD-106
Plugs
* This illustration is described with the BC-119N.
20
must be installed into the
and the BC-
charger adapter
Connectors
Screws supplied
with the charger
adapter
D Rapid charging with the BC-119N+AD-106
The optional BC-119N provides rapid charging of the Li-Ion
battery pack. The following items are additionally required.
• AD-106 charger adapter
• An AC adapter (may be supplied with BC-119N depending
on version) or the DC power cable (OPC-515L/CP-23L).
Battery
AC adapter
pack
(Not supplied with
some versions.)
Optional OPC-515L
(for 13.8 V power
source) or CP-23L
(for 12 V cigarette
lighter socket) can
be used instead of
IMPORTANT!
the AC adapter.
Ensure the tabs on
the battery pack are
correctly aligned with
the guide rails inside
the charger.
Transceiver
Turn power OFF
AD-106 charger
adapter is installed
in BC-119N.
Tabs
Guide rails