6 - 14 Symbol DS3407 Product Reference Guide
Event Reporting
The host can request the digital scanner to provide certain information (events) relative to the digital scanner's
behavior. Enable or disable the events listed in
bar codes.
Event Codes
Table 6-2
Event Class
Decode Event
Boot Up Event
Parameter Event
Decode Event
Parameter # F0h, 00h
If you enable this, the digital scanner sends a message to the host when the scanner successfully decodes a bar
code. Disable this to send no notification.
Enable Decode Event
Event
Non parameter decode
System power-up
Parameter entry error
Parameter stored
Defaults set (and parameter event is
enabled by default)
Number expected
(01h)
Table 6-2
and on the following pages by scanning the appropriate
Code Reported
0x01
0x03
0x07
0x08
0x0A
0x0F
*Disable Decode Event
(00h)