Data Matrix Inverse
Parameter # F1h 4Ch
This parameter sets the Data Matrix inverse decoder setting. Options are:
•
- the scanner decodes regular Data Matrix bar codes only.
Regular Only
•
- the scanner decodes inverse Data Matrix bar codes only.
Inverse Only
•
Inverse Autodetect
NOTE If you enable
selected. When you disable DPM Scanning, the previous (user-selected) Data Matrix Inverse setting
remains in effect.
*Regular
(00h)
Inverse Autodetect
(02h)
- the scanner decodes both regular and inverse Data Matrix bar codes.
DPM Scanning on page
5-7, the scanner behaves as if the Inverse Autodetect setting is
Symbologies 10 - 73
Inverse Only
(01h)