Important Safety Points; Limited Two-Year Warranty - Bench Dog Tools ProMax Instructions Manual

Important Safety Points

Before operating your router table please read this manual thoroughly. Safety and use tips are contained in
the manual. This page is not the sole source of safety information. Retain the manual for future reference.
Refer to your router owner's manual for safety instructions regarding use of that tool. This manual is not an
instruction book on how to do woodworking with a power tool. We encourage all woodworkers to continually
seek improvement in their woodworking skills, regardless of their craftsmanship or years of experience. The
router table, fence and accessories must only be used for their intended purpose: woodworking via normal
routing operations. "Normal operations" means basic shaping of wood in conditions where grounded electricity,
sharp tools, dust, and rapidly spinning parts can be used or encountered safely. The following instructions
elaborate on this concept.
1. Do not use your router table as a step or seat.
2. The top and cabinet must be properly secured, and must be level before use. Inspect your table and base for
damage and levelness prior to each use.
3. Keep work area clean, dry and well lit.
The hardware affixing the insert to the router top must be installed for safe use. Tighten insert hold-down
4.
screws before each use.
Safe operation requires a router table fence, bit guard, dust collection system, starting pin or fulcrum, and
5.
speed reducer for large diameter bits. We recommend reducing router speed for 1" or larger diameter bits.
Consult your bit manufacturer for the exact speed.
6. Use the right tool for the job. Do not force a tool or attachment to do a job for which it was not designed.
7. Secure your work with a featherboard, clamps, or a vice when appropriate. The use of inappropriate
accessories may cause injury.
8. Wear safety glasses, dust mask, face shield and ear protection. This is not an exhaustive list. Every-day eye
glasses do not substitute for safety glasses.
9. Do not wear gloves or jewelry while using a power tool and ProMAX
10. Maintain your equipment and its accessories in good working condition. Look for wear, poor alignment of
moving parts, binding of moving parts, breakage, poor mounting, or other conditions that may affect
operation and safety. Repair or replace any damaged parts.
11. Disconnect the power before moving, adjusting, or repairing parts, or otherwise maintaining your router table
and any accessories you may be using.
12. Keep children, pets, and those who may disregard safety away from work area, cords, sockets and tools.
13. Wear snug fitting clothes and keep long hair back to avoid catching in moving parts.
14. Do not overreach. Maintain balanced footing and stance.
15. Stay alert. Use common sense.

LIMITED TWO-YEAR WARRANTY

We make every effort to assure that our products meet quality and durability standards, and warrant to the
original retail purchaser that this product is free from defects in materials and workmanship for two years. Remedy
shall be limited to Bench Dog's choice of repair, replacement or refund. This warranty does not provide remedy
for consequential economic loss.
This is a limited two-year warranty. It requires the purchaser to contact Bench Dog in writing within 30 days of
discovering the defect. Warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence
or accidents, repairs or alterations, or due to lack of maintenance. It excludes components and parts not
manufactured by Bench Dog, defects caused by failure to provide a suitable installation environment, and damage
caused by use for purposes other than those for which the product was designed. Bench Dog, Inc. reserves the
right to make product changes without notice and without obligation to make these changes on products
previously sold. It excludes warranties of fitness for a particular purpose.
If the product is defective, we reserve the right to fix it, replace it, or refund the cost of the product to you.
Typically, this results in a refund. All claims are limited to the two-year claims period. We must receive the product
before a credit or refund will be issued. The warranty language on the product or in the product's manual may
contain additional limitations, which govern.
If you wish to return something, call the dealer where you purchased the product. If you wish to return something
purchased from Bench Dog directly, call 1-800-786-8902 to receive an RMA number. Upon receipt and inspection of
the goods, a credit or replacement will be issued for defective products. Return of nondefective items to Bench
Dog are subject to a 7% restocking charge. This is necessary due to the cost of checking, repackaging, and
inventorying the stock.
BENCH DOG DISCLAIMS AND BUYER EXPRESSLY WAIVES ANY AND ALL WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO, IMPLIED CONDITIONS OF FITNESS FOR A PARTICULAR
PURPOSE, MERCHANTABILITY, OR ANY OTHER MATTER.
10