3.2.14 APRS Operating Frequency
Example:
144.390 MHz, the APRS operation frequency is configured for operation frequency for the data band.
3.2.15 Placing a Transceiver in APRS mode
Press the [TNC] key to place a transceiver in APRS mode.
After the message "Opening TNC" appears for three seconds, "APRS" appears and the APRS data
communication capability becomes active. (Data communications take place on the data band.)
3.2.16 Transmitting a Beacon
Press the [BCON] key to transmit a beacon.
The beacon is transmitted according to the method selected in Menu 3D0 (TX Beacon – Method).
TH-D72A/E
3 PREPARATIONS FOR OPERATING APRS
Figure 3-24 Frequency
23
CONTENTS