Data Band; Packet Speed; Position; Using Internal Gps - Kenwood TH-D72A/E User Manual

3.2.4 Data Band

To configure the data band, select Menu 310 (APRS-Int.TNC-Data Band).

3.2.5 Packet Speed

To configure the data speed, select Menu 311 (APRS-Int. TNC-Data Speed).

3.2.6 Position

3.2.6.1 Using Internal GPS

Press the [F] + [MARK] keys to enable the internal GPS unit.
Once the internal GPS unit starts positioning (iGPS pictogram blinks), the position data from the unit
become available.

3.2.6.2 Using GPS Receivers

To use with an external GPS receiver, disable the internal GPS unit.
To configure for a GPS terminal, select Menu 331 (APRS - COM Port).
• Baud Rate: 4800 bps (select the same baud rate as that is configured for a GPS receiver.)
• Input: GPS (enable the GPS receiver)
• Output: OFF (if no WAYPOINT, DGPS are used.)
TH-D72A/E
Figure 3-7 Menu 310 (Int.TNC – Data Band)
Figure 3-8 Menu 311 (Int.TNC – Data Speed)
Figure 3-9 APRS Operating Frequency
3 PREPARATIONS FOR OPERATING APRS
19
CONTENTS