Program Control - Omron E5EC-T Datasheet

Program Control

Number of programs (patterns)
Number of segments (steps)
Segment setting method
Segment times
Alarm setting
Reset operation
Startup operation
PID sets
Alarm SP function
Program status control
Wait operation
Time signals
Program status output
Program startup operation
Operation end operation
Program SP shift
8
32
Time setting (Segment set with set point and time.)
Slope setting (Segment set with segment type, set point, slope, and time.)
0 h 0 min to 99 h 59 min
0 min 0 s to 99 min 59 s
Set separately for each program.
Select either stopping control or fixed SP operation.
Select continuing, resetting, manual operation, or run mode.
Number of sets 8
Setting method Set separately for each program (automatic PID group selection also supported).
Select from ramp SP and target SP.
Segment operation Advance, segment jump, hold, and wait
Program operation Program repetitions and program links
Wait method Waiting at segment ends
Wait width setting Same wait width setting for all programs
Number of outputs 2
Number of ON/OFF
1 each per output
Operations
Setting method Set separately for each program.
Program end output (pulse width can be set), run output, stage output
PV start Select from segment 1 set point, slope-priority PV start
0 h 0 min to 99 h 59 min
Standby
0 day 0 h to 99 day 23h
Select from resetting, continuing control at final set point, and fixed SP control.
Same program SP shift for all programs
E5EC-T/E5AC-T
9