Energy Saving Tips; Installation Instructions; Ceiling Assembly Frame Installation Requirements - Carrier Air Conditioner Owner's Manual

ENERGY SAVING TIPS

1
Select the temperature setting that suits your comfort needs and leave it at that chosen setting.
2
Keep the unit's air filters clean. (See the Normal Maintenance Procedures section of this manual on page 19.)
3
During extreme outdoor temperatures, the heat gain of the vehicle may be reduced by:
- parking the vehicle in a shaded area
- keeping the windows and doors closed
- avoiding the use of heat producing appliances
- using window shades (binds and/or curtains)
For a more permanent solution to reduce the high heat gain, window awnings and/or window glass tinting
should be considered.

INSTALLATION INSTRUCTIONS

BEFORE INSTALLATION
Test run the unit with proper power supply outlet. Refer to the Operating Instructions section in this Owner's Guide.
Make sure all the controls operate correctly then disconnect the power supply of the unit.
Moving parts can cause personal injury. Be careful when test-running the unit.
Do not operate the unit with exterior cover removed.

CEILING ASSEMBLY FRAME INSTALLATION REQUIREMENTS

1
The ceiling assembly frame must be installed over
the roof opening. The ceiling assembly frame bolts
to the bottom of the roof top unit. Compression of
the framed ceiling cavity between the roof top
unit and the ceiling assembly frame is what holds
both components in place.
WARNING
Telescoping Divider #
71DC6A3006 (supplied)
71DC6A3005
71DC6A3007
2
Provided with the ceiling assembly frame is a tele-
scoping divider assembly which is used to sepa-
rate the warm return air from the cold supply air.
The telescoping divider size is determined by mea-
suring the ceiling cavity depth. (the measurement
from the ceiling to the roof)
Range
3.25"~ 4.25"
2.0"~ 2.75"
5.0"~ 6.0"
'
OWNER S GUIDE -10