Lamps (Drl); Taillamps, Turn Signal; Stoplamps, And Back-Up - Chevrolet 2011 Colorado Owner's Manual

Taillamps, Turn Signal,

Stoplamps, and Back-Up

Lamps
A. Stoplamp/Taillamp
B. Turn Signal/Taillamp
C. Back up Lamp
To replace one of these bulbs:
1. Open the tailgate. See Tailgate
on page 2 7.
2. Remove the two rear lamp
assembly screws near the
tailgate latch.
3. Pull the lamp assembly away
from the vehicle.
I n f o r ma t i o n P r o v i d e d b y :
Vehicle Care
4. Turn the bulb socket
counterclockwise to remove it
from the taillamp assembly.
5. Holding the socket, pull the old
bulb straight out to release it
from the socket.
6. Push the new bulb straight into
the socket until it clicks.
7. Insert the bulb socket into the
taillamp assembly and turn it
clockwise to secure.
8. Reinstall the taillamp assembly
and tighten the screws.
10-37