Chevrolet 2011 Colorado Owner's Manual page 169

5. Locate the device named Your
Vehicle in the list on the cell
phone. Follow the instructions
on the cell phone to enter the
PIN that was provided in Step 3.
After the PIN is successfully
entered, the system prompts you
to provide a name for the paired
cell phone. This name will be
used to indicate which phones
are paired and connected to the
vehicle, see Listing All Paired
and Connected Phones later in
this section for more information.
6. Repeat Steps 1 through 5 to pair
additional phones.
Listing All Paired and Connected
Phones
The system can list all cell phones
paired to it. If a paired cell phone is
also connected to the vehicle, the
system responds with is connected
after that phone name.
1. Press and release .
2. Say Bluetooth.
3. Say List.
Deleting a Paired Phone
If the phone name you want to
delete is unknown, see Listing All
Paired and Connected Phones.
1. Press and release .
2. Say Bluetooth.
3. Say Delete. The system asks
for which phone to delete.
4. Say the name of the phone you
want to delete.
Connecting to a Different Phone
To connect to a different cell phone,
the Bluetooth system looks for the
next available cell phone in the
order in which all the available cell
phones were paired. Depending
on which cell phone you want to
connect to, you may have to use
this command several times.
1. Press and release .
2. Say Bluetooth.
I n f o r ma t i o n P r o v i d e d b y :
Infotainment System
3. Say Change phone.
If another cell phone is
found, the response will be
<Phone name> is now
connected.
If another cell phone is not
found, the original phone
remains connected.
Storing and Deleting Phone
Numbers
The system can store up to
30 phone numbers as name tags
in the Hands Free Directory that
is shared between the Bluetooth
and OnStar systems.
The following commands are used
delete and store phone numbers.
Store: This command will store
a phone number, or a group of
numbers as a name tag.
7-23