Seat Rotation - Pride Rally Owner's Manual

V I I . C O M F O R T
FRONT-TO-BACK SEAT ADJUSTMENT
You can reposition the Rally’s seat forward or rearward
to one of three settings to adjust the distance between
the seat and the tiller. See figure 12.
1. Remove the seat from your Rally. See VIII.
“Disassembly and Assembly.” See figure 15.
2. Remove the four bolts that fasten the seat to the
seat platform. See figure 12.
3. Align the seat platform with the desired set of
holes on the seat.
4. Install the four bolts securely.
ARMREST WIDTH ADJUSTMENT
The armrest width of your Rally can be adjusted
inward or outward. See figure 13.
1. Loosen the adjustment knobs at the back of the
seat frame.
2. Slide the armrests in or out to the desired width.
3. Tighten the adjustment knobs.
NOTE: The armrests also swivel up to make getting
on and off of your Rally easier.

SEAT ROTATION

The seat lock lever locks the seat in one of eight
positions. See figure 14.
1. Pull up on the seat lock lever to unlock the seat.
2. Rotate the seat to the desired position.
3. Release the seat lock lever to lock the seat
securely in place.
Figure 14. Seat Lock Lever
Rally
A D J U S T M E N T S
Figure 12. Front-to-Back Seat Adjustment
Figure 13. Armrest Width Adjustment
PULL UP
TO
ROTATE
SEAT
Figure 15. Seat Disassembly and Assembly
SEAT
PLATFORM
SEAT LOCK
LEVER
SEAT BOLTS
REPOSITIONING
HOLES
ARMRESTS
ADJUSTMENT
KNOBS
SEAT FRAME
23