Receiving Broadcast Station; Dvr-505/Dvr-7000 (En - Kenwood DVR-505 Instruction Manual

Receiving broadcast station

It is also possible to receive them by one-touch operations
by storing up to 30 stations in the preset memory. (see page
22)
1
Select the TUNER input
MAIN UNIT
2
Select the broadcast band
MAIN UNIT
3
Select a tuning mode
REMOTE
AUTO/MONO
4
Select a station
P.CALL (preset call)
MAIN UNIT REMOTE
P.CALL / THUM / PAGE
Press the 4 , ¢ keys to select a
preset station.
REMOTE
RADIO
BAND
REMOTE
RADIO
BAND
AUTO (auto tuning)
REMOTE
TUNE / TV VOLUME
Press the TUNE key to receive the
next tuned station automatically
RADIO/BAND
key
AUTO/MONO
4, ¢
key
keys
1, ¡ keys
When the BAND key is pressed, this unit will be
switched on automatically.
Auto tuning
mode indication
Preset number
Each press changes the band.
1 FM
2 AM
Each press switches the mode
1 auto tuning mode
2 manual tuning mode
When the TUNE keys are pressed in AUTO mode, a station will
be tuned in automatically and tuning will stop. Stereo reception
will be made automatically when a stereo broadcast with suffi-
cient signal strength is received.
MANUAL (manual tuning)
Each time a key is pressed, the frequency
is changed by one step.
When a key is pressed continuously, the
frequency changes continuously.
Use the manual tuning mode when re-
ception is noisy due to weak reception.
(In the manual mode, stereo broadcasts
are received in monaural.)

DVR-505/DVR-7000 (EN)

BAND key
4, ¢ keys
Tuning indication
Stereo tuning indication
Frequency display
Band display
Lit
REMOTE
TUNE / TV VOLUME
21