Changing The Camera Angle; Using Introscan Function - Kenwood DVR-505 Instruction Manual

30

Changing the Camera angle

DVD
Some disc contains multiple angles particular scene or
sequence. If the disc only has one angle, this feature
won't work.
Using the on-screen banner display
1 During playback, press
SCREEN key on the remote.
2 Press the Cursor left/right (2/3)
keys until the ANGLE icon is high-
lighted.
3 Press the ENTER key.
The ANGLE menu appears
4 Select the angle with press the
ENTER key.
÷ The menu is switched off when no operation is
performed for about 5 seconds.
the ON
RDS
ENTER
ENTER
Using the On-screen banner display

Using IntroScan function

CD VCD
IntroScan plays the first few seconds of each track on
only one disc similar to the scan feature that's on many
car radios.
Using the on-screen banner display
1 During playback, press the ON
SCREEN key on the remote.
2 Press the Cursor left/right (2/3) keys
until the IntroScan icon is highlighted.
3 Press the ENTER key.
÷ The first 10 seconds of each track
play.
÷ After Intro Scan goes through all of
the tracks, it stops.
÷ If you want to stop IntroScan while
it's in progress, just press ENTER
key on the remote (the current track
starts playing in its entirety).
(When the On-screen display has gone
out, press the ON SCREEN key, select
Intro Scan, and press the ENTER key.)
Note Note
P.B.C. on mode of VCD, the IntroScan function may
not work.
DVR-505/DVR-7000 (EN)
RDS
ENTER
ENTER