Receiving Broadcast Station; R-Sg7/Dp-Sg7/X-Sg7 (En - Kenwood R-SG7 Instruction Manual

26

Receiving broadcast station

It is also possible to receive them by one-touch operations by storing up to 40 stations in the preset
memory.
band
1 1
Remote control unit
P.CALL
4 ¢
Select a station
auto/mono
1
2 2
To increase
2
frequency
tuning
To decrease
frequency
3 3
Preset call
1. Select the broadcast band.
Each press alternates the band.
1FM
2AM
2. Select a station.(It is recommended that you memorize the sta-
tion in preset memory in advance.)
When stations have been memorized (preset call)
Every time the key is pressed, the preset stations are switched
over as follows.
Press ¢for the order of 1=2=3 ... 38=39=40=1...
Press 4for the order of 40=39=38 ... 3=2=1=40...
When no stations have been memorized
Select the station tuning mode according to the strength of
radio waves in your environment.
When the radio wave condition is good
When the reception is noisy due to weak radio wave
1 Select the auto or manual tuning mode.
Each press alternates the mode.
÷ Normally, use the AUTO (Auto tuning) mode.
Collective presetting of stations (auto preset)
One-by-one presetting (manual preset)
: Auto tuning mode (stereo reception)
: Manual tuning mode (monaural reception)
1"AUTO" lit (Auto tuning)
2"AUTO" not lit (Manual tuning)
Hearing sound

R-SG7/DP-SG7/X-SG7 (EN)

1 1
3 3
2 2
¶