Table of Contents
Advertisement
Setup
1
2
3
4
5
MENU
Press
button.
MENU
Select "SETUP", and press
Press
or
button to select the adjusting item.
"NAV": Setup input and switch method of the navigation
picture.
Item
Setting
"RGB"*
When Kenwood navigation system is connected
by the dedicated cable.
"AV-IN"
When connected to AV-IN terminal be composite
signal cable.
"OFF"
It doesn't switch the navigation picture.
*Default setting
If you set to "OFF" while the audio source is set to "NAV",
the audio source would switch to "NORMAL".
"AV-IN": Setup switch method of the picture input to AV-
IN terminal.
Item
Setting
"VD"*
Switched by the operation of the video source.
"CAM"
Switched automatically when video signal is
input to AV-IN terminal.
"OFF"
It doesn't switch the picture input to AV-IN
terminal.
*Default setting
You cannot set "AV-IN" when "NAV" is set to "AV-IN".
If you set to "OFF" while the audio source is set to "AV-IN",
the audio source would switch to "NORMAL".
"BEEP": Setup the beep sound ON/OFF.
Item
Setting
"ON"
Beep is heard.
"OFF"*
Beep is canceled.
*Default setting
Press
or
button to select each item.
Select "RETURN" and press
mode.
Also, the monitor exits from Menu mode by no opeation
for 10 seconds.
ENTER
button.
VOICE
ENTER
to end the Menu
VOICE
English 5
Advertisement
Table of Contents
