Kenwood LZ-651W Instruction Manual page 3

LZ-651W Basic Operation
BAND DISC
OUT
M/S
ZOOM
MENU
CANCEL MENU
IN
PWR SRC
POS ROUTE
NAV/
DIRECT ATT VIDEO
ENTER MODE
VOICE
SC1
AUDIO
OPEN
SC2
SUBTITLE
AV OUT ANGLE CLEAR
Set Mode Setting switch to "MON"
position while operating this LCD monitor.
Refer to the instruction manual for the
operation of the navigation system.
Display the setup screen for 5 seconds as
follows:
• Screen mode
• Video source
• Audio source
• Volume
1 Mode Setting switch
Selects the target device to control.
MON: Monitor control mode
NAVI: Navigation system control mode
AUD: Kenwood car audio system control
mode
2 Volume Control button
3 Power button
4 Cursor button
Selects the item when the menu screen is
displayed.
5 Enter button
Performs selected item when the menu
screen is displayed.
6 Menu Display button
Displays the menu screen. (page 4)
7 Video Source Select button
Each time the button is pressed the
monitor's picture switches as the navigation
picture or the video picture set to "AV-IN".
8 Audio Source Select button
BAND DISC
OUT
M/S
ZOOM
MENU
CANCEL MENU
IN
PWR SRC
POS ROUTE
NAV/
DIRECT ATT VIDEO
.,?-& ABC DEF
GHI JKL MNO
PQRS TUV WXYZ
+ SPACE BS
AV OUT SBF
9 Screen Mode Select button
Each time the button is pressed the audio
source switches as follows:
Sound of monitoring picture
NORMAL
selected by [Video Source
Select] button.
NAV Sound of navigation system.
Sound of input video picture
AV-IN
from AV-IN.
OFF No sound.
When the voice guidance event for the
navigation system takes place, the audio
source switches temporarily to the
sound used by the navigation system
even with the sound through the AV-IN
being output.
Each time the button is pressed the screen
mode switches as follows.
[FULL]
[ZOOM]
[JUST]
[CINEMA]
[NORMAL]
English 3