Horizon Fitness CE4.3 Owner's Manual page 14

ASSEMBLY STEP 5
14
LOWER
LINK ARM
LOWER
HANDLEBAR
TEFLON SPACER
WASHERS
LOWER HANDLEBAR
NUT (K)
LOWER LINK ARM
GUIDE RAIL
TEFLON WASHERS (I)
LOWER
HANDLEBAR
INSIDE
ELBOW
COVER
HARDWARE FOR STEP 5:
BOLT (J)
A Open HARDWARE BAG FOR STEP 5.
B Slide SPACER (H) into LOWER LINK ARM.
C Place TEFLON WASHERS (I) on either side
of SPACER (H). While holding TEFLON
WASHERS (I) slide LOWER LINK ARM into
SPACER (H)
bottom end of LOWER HANDLEBAR.
D Insert BOLT (J) into LOWER HANDLEBAR and
OUTSIDE secure using NUT (K).
ELBOW
COVER
E Attach the outside ELBOW COVER to elbow
joint using 1 SCREW (L).
F Snap the INSIDE ELBOW COVER onto the
outside elbow cover. Note the position of the
snap tabs before snapping into position.
G Repeat on other side.
SCREW (L)
BOLT (J)
60 mm
Qty: 2
SPACER (H)
NUT (K)
44 mm
Qty: 2
Qty: 2
TEFLON
WASHER (I) SCREW (L)
28.4 mm Qty: 2
Qty: 4