Wolf Drawer Microwave Ovens - Wolf 24" User Manual

Wolf Drawer Microwave Ovens

Drawer Microwave Ovens
IMPORTANT NOTE: This installation must be completed
by a qualified installer or Wolf authorized service center
technician.
Read this entire installation guide prior to installation and
save for the local inspector's reference. The homeowner
should keep this installation guide for future reference.
This appliance must be installed in accordance with
National Electrical Codes, as well as all state, municipal
and local codes. The correct voltage, frequency and
amperage must be supplied to the appliance from a dedi-
cated, grounded circuit which is protected by a properly
sized circuit breaker or time delay fuse. The proper
voltage, frequency and amperage ratings are listed on
the product rating plate.
Record the model and serial numbers before installing the
warming drawer. Both numbers are listed on the product
rating plate, located on the bottom of the oven cavity. The
drawer must be in the open position to view the rating
plate. Refer to the illustration below.
Wolf Drawer Microwave Oven
Model Number
Serial Number
RATING
PLATE
Location of rating plate.
IMPORTANT NOTE: When using any microwave oven
generating heat, there are certain safety precautions you
should follow. These precautions are listed in the Wolf
drawer microwave ovens use & care guide provided with
the unit. Read all and follow carefully.
If the information in this guide is not followed exactly, a
fire or electrical shock may result that could cause
property damage, personal injury or death.
To reduce the risk of tipping, the drawer microwave
oven must be secured by properly installed anti-tip
blocking.
This microwave oven must be electrically grounded in
accordance with local codes.
Make sure the wall coverings and the cabinets around
the appliance can withstand the heat generated by a
microwave oven.
wolfappliance.com/specs
3