Table of Contents
Advertisement
~-------
"i1"
946261-9701
PREFACE
This manual provides detailed instructions for installing a Texas Instruments Model DSIO
Cartridge Disk System in conjunction with a properly installed Model 990 Computer. In addition,
it contains information required to program the computer to use the disk system and a
description of the disk system with specific attention to the controls and indicators. The
information is divided into the following sections:
Section
1
General Description -
This
section briefly describes the features and major com-
ponents of the disk system to acquaint the reader with the system.
2
Installation - This section contains step-by-step procedures for unpacking and install-
ing
a Model DSIO Cartridge Disk System. Information is also provided to ensure that
the site for the installation is properly prepared prior to installation of the disk system.
The procedures given in this section presuppose that the reader is not familiar with
digital electronics.
3
Programming
~
This
section presents interfacing information for use by a programmer
in designing a service routine to control the disk system's activity.
4
Operation -
This
section describes the controls and indicators of the disk system for
disk system operators, and describes the use of those controls and indicators in the
operation of the disk system.
Title
Model 990/5 Computer System Hardware User's Manual
Model 990/10 Computer System Hardware Reference Manual
Model 990/12 Computer Hardware User's Manual
Model 990 Computer Model DSIO Cartridge Disk System
Depot Maintenance Manual
Model 990 Computer Programming Card
Model 990 Computer TMS 9900 Microprocessor Assembly
Language Programmer's Guide
iii/iv
Part Number
946294-9701
945417 -9701
2264446-9701
946262-9701
943440-9701
943441-9701
Digital Systems Division
Advertisement
Table of Contents
