Demonstration Mode Setting - Kenwood KDC-W707 Instruction Manual

In Standby mode

Demonstration mode Setting

Sets the demonstration mode.
1
Select the Demonstration mode
Push the Control knob towards [FM] or [AM].
Select the "DEMO Mode" display.
2
Set the Demonstration mode
Press the Control knob for at least 2 seconds.
Each time you press the knob at least 2 seconds,
the Demonstration mode alternates between the
settings shown in the table below.
Display Setting
"DEMO Mode:ON" The Demonstration mode function is ON.
"DEMO Mode:OFF" Exit Demonstration mode (Normal mode).
39
|
English