Related Manuals for Kenwood KDC-W7037
Summary of Contents for Kenwood KDC-W7037
- Page 1 CD-RECEIVER KDC-W7537U KDC-W7537UY KDC-W7037 KDC-W7037Y INSTRUCTION MANUAL © B64-3629-00/00 (EW/E2W)
-
Page 2: Table Of Contents
Contents Safety precautions Notes General features Power Selecting the Source Volume Attenuator Audio Control Audio Setup Speaker Setting Subwoofer Output TEL Mute Function Control mode Display Type Selection Status Setting Graphic Display Selection Text Display Selection —Display Type B&E— Text Display Selection —... -
Page 3: Safety Precautions
Kenwood disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenwood dealer for connectable models of disc changers/ CD players. Note that any Kenwood disc changers/ CD players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit. -
Page 4: Notes
• If you experience problems during installation, consult your Kenwood dealer. • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • Characters that conform to ISO 8859-1 can be displayed. - Page 5 : Audio fi Audio file An online manual about audio files is put on the site, www.kenwood.com/audiofile/. On this online manual, detailed information and notes which are not written in this manual are provided. Make sure to read through the online manual as well.
- Page 6 Notes About Bluetooth Hands free control Refer to the instruction manual of the Bluetooth Hands Free Box KCA-BT100 (optional accessory). About Menu operation For how to operate Menu, refer to <Menu System> in this instruction manual. For the items to be set up, refer to the instruction of Hands Free Box.
-
Page 7: General Features
General features ATT VOL Release button Power Turning ON the Power Press the [SRC] button. ⁄ • When the power is ON, the <Security Code> (page 27) is displayed as "CODE ON" or "CODE OFF". Turning OFF the Power Press the [SRC] button for at least 1 second. Selecting the Source There are two types of source selection methods depending on the setting. -
Page 8: Volume
General features Volume Increasing Volume Turn the [VOL] knob clockwise. Decreasing Volume Turn the [VOL] knob counterclockwise. Attenuator Turning the volume down quickly. Press the [ATT] button. Each time you press the button, the Attenuator turns ON and OFF. When the Attenuator is ON, the "ATT" indicator blinks. -
Page 9: Speaker Setting
• Dual Zone System Main source and sub source (Auxiliary input) output Front channel and Rear channel separately. - Set up the channel of sub source by <Dual Zone System Setting> (page 30). - Select Main source by [SRC] button. - Adjust the volume of Front channel by [VOL] knob. -
Page 10: Function Control Mode
General features Function Control mode To set up various functions of this unit, select tree- structured function items. Enter Function Control mode Press the [FNC] button. Select your desired setup item Select a setup item using the Control knob. Operation type Operation Movement between Turn the Control knob. -
Page 11: Graphic Display Selection
⁄ • To change the information by the Display Type, refer to the page on the following table for the methods to alternate by the Display Type. Display Type Graphic 1 Status 2 Text 3 — Upper 4 — — Middle 5 —... -
Page 12: Text Display Selection
3 digits of its number are displayed. (KDC-W7537U/ W7537UY) • Album name cannot be displayed in WMA file. (KDC-W7037/W7037Y) • Music title, Artist name, and Album name cannot be displayed in WAV file. (KDC-W7537U/W7537UY) • When playing music from iPod or music edited by "Music Editor", the folder name display may show something... -
Page 13: The Text Display
• In the middle text display part, the Kenwood logo is displayed if the contents of the information cannot be displayed. • In the lower text display part, no information is displayed when display without information is selected. The text display... -
Page 14: Theft Deterrent Faceplate
General features Theft Deterrent Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the Faceplate Press the Release button. Drop open the faceplate. Drawing the faceplate to left side pull it to forward and remove it. -
Page 15: Tuner Features
Tuner features Tuning Selecting the station. Select tuner source Press the [SRC] button. Select the "TUNER" display. Refer to <Selecting the Source> (page 7). Select the band Push the Control knob towards [FM] or [AM]. Each time you push the knob toward [FM], it switches between the FM1, FM2, and FM3 bands. -
Page 16: Direct Access Tuning
Tuner features Function of remote control Direct Access Tuning Entering the frequency and tuning. Select the band Press the [FM] or [AM] button. Enter Direct Access Tuning mode Press the [DIRECT] button on the remote control. "– – – –" is displayed. Enter the frequency Press the number buttons on the remote control. -
Page 17: Rds Features
RDS features Traffic Information Changing to traffic information automatically when a traffic bulletin starts even when you are not listening to the radio. Press the [TI] button. Each time you press the button, the Traffic information function turns ON and OFF. When a traffic bulletin starts, "Traffic INFO"... -
Page 18: Pty (Program Type)
RDS features PTY (Program Type) Selecting the Program Type and searching for a station. Enter PTY mode Press the Control knob. During PTY mode the "PTY" indicator is ON. ⁄ • This function cannot be used during a traffic bulletin or AM reception. -
Page 19: Changing Language For Pty Function
Changing Language for PTY Function Selecting the Program Type display language. Enter PTY mode Refer to <PTY (Program Type)> (page 18). Enter Changing Language mode Press the [TI] button. Select the language Turn the Control knob or push it towards up or down. -
Page 20: English
CD/USB device/Audio file/External disc control features Release button S.MODE IN indicator Playing CD & Audio file When there is no disc inserted Drop open the faceplate Press the Release button. Insert a disc. Push the faceplate on the left side, and return it to its former position. -
Page 21: Playing Usb (Ipod) Device
In this case, "RESUMING" is displayed without displaying a folder name, etc. Changing the browse item will display a correct title, etc. • When the iPod is connected to this unit, "KENWOOD" or "✓" is displayed on the iPod to indicate that you cannot operate the iPod. -
Page 22: Playing External Disc
⁄ • There is no sound while the Audio file is being searched. • You cannot fast Forwarding and Reversing while AAC file is being played. (KDC-W7037/W7037Y) Music Search Switching between music contained in the disc or folder being played now. -
Page 23: Play Function Of Cd And Audio
Play function of CD and Audio file Setting up the Repeat Play and Scan Play Set up the play function Using the Control knob, set your desired setup item to On/Off. For the operation method, refer to <Function Control mode> (page 10). When the play function is turned on, “ON”... -
Page 24: Disc Naming (Dnps)
CD/USB device/Audio file/External disc control features Disc Naming (DNPS) Attaching a title to a CD. Play the disc you want to attach a name to ⁄ • A title cannot be attached to MD or Audio file media. Enter Menu mode Using the Control knob, select "MENU". -
Page 25: File Select
Return to first item Push the Control knob towards left for at least 1 second. Function of KDC-W7537U/W7537UY. Function of KDC-W7037/W7037Y. The "2" or "3" symbol shown beside the displayed item indicates that the item is preceded or followed by another item. -
Page 26: Menu System
Menu system Menu System Setting beep sound during operation, etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. Enter Menu mode Using the Control knob, select "MENU". For the operation method, refer to <Function Control mode>... -
Page 27: Security Code
In Standby mode Security Code Activating the Security Code disables the usage of audio unit by someone else. Once the Security Code is activated, the entry of authorized Security Code is required to turn on the audio unit when it is removed from the vehicle. -
Page 28: Ipod Mode Setting
Menu system Function of KDC-W7537U/KDC-W7537UY In USB mode with iPod connected iPod mode setting Setting up the iPod operation method in File Select. Display Setting "iPod Mode : ON" Uses the operation method similar to that of iPod. "iPod Mode : OFF" Uses the operation method different from that of iPod. -
Page 29: Synchronize Clock
In Standby mode Synchronize Clock Synchronizing the RDS station time data and this unit’s clock. Display Setting "SYNC : ON" Synchronizes the time. "SYNC : OFF" Adjust the time manually. ⁄ • It takes 3 to 4 minutes to synchronize the clock. In Standby mode DSI (Disabled System Indicator) A red indicator will blink on the unit after the... -
Page 30: Switching Preout
Menu system In Standby mode Switching preout Alternating the preout between the rear and subwoofer. (With the subwoofer the sound outputs without being effected by fader control.) Display Setting "SWPRE : Rear" Rear preout. "SWPRE : Sub-W" Subwoofer preout. In Standby mode Built-in Amp Setting Controlling the built-in amplifier. -
Page 31: B.m.s. Frequency Offset
Other than Standby mode B.M.S. Frequency Offset Setting the central frequency, boosted by B.M.S. Display Setting "AMP FREQ : Normal" Boost with the normal central frequency. "AMP FREQ : Low" Drop the normal central frequency 20%. When LX AMP unit connecting AMP Control You can control the LX AMP connected to the unit. -
Page 32: Local Seek
Menu system In Tuner mode Local Seek Only stations whose reception is good are searched in auto seek tuning. Display Setting "Local Seek : OFF" The local seek function is OFF. "Local Seek : ON" The local seek function is ON. In Tuner mode Tuning Mode Sets the tuning mode. -
Page 33: Auxiliary Input Display Setting
Auxiliary Input Display Setting & Disc Naming Selecting the display when alternating to Auxiliary input source. For the Disc Naming refer to the <Disc Naming (DNPS)> (page 24). Select Auxiliary input source Press the [SRC] button. Select the "AUX"/"AUX EXT" display. Refer to <Selecting the Source>... -
Page 34: Built-In Auxiliary Input Setting
Menu system In Standby mode Built-in Auxiliary input Setting Set the Built-in Auxiliary Input function. Display Setting "Built in AUX : OFF" When selecting the source there’s no Auxiliary Input. "Built in AUX : ON" When selecting the source there’s Auxiliary Input. In Standby mode Power OFF Timer Setting the timer to turn this unit’s power OFF... -
Page 35: Audio Preset Recall
Other than Standby mode Audio Preset Recall Recalling the sound setup registered by <Audio Preset Memory> (page 34). Select the source Press the [SRC] button. Refer to <Selecting the Source> (page 7). Enter Menu mode Using the Control knob, select "MENU". For the operation method, refer to <Function Control mode>... -
Page 36: Basic Operations Of Remote Control
When the button is pressed again, the volume returns to the previous level. DIRECT : This button is used when Kenwood Bluetooth HANDS FREE BOX is connected. For more information, refer to the instruction manual of Bluetooth HANDS FREE BOX. -
Page 37: In Tuner Source
Audio Control [AUD] button Selects the Audio item to be adjusted. [VOL] buttons Adjusts the Audio item. ⁄ • Refer to <Audio Control> (page 8) for the operation method, such as the procedures for Audio control and others operations. Dual Zone System [2-ZONE] button Each time you press the button, "2 ZONE"... -
Page 38: Accessories/ Installation Procedure
English • If your car is not prepared for this special connection- system, consult your Kenwood dealer. • Only use antenna conversion adapters (ISO-JASO) when the antenna cord has an ISO plug. • Make sure that all wire connections are securely made by ...1... -
Page 39: Connecting Wires To Terminals
CONT Connect to the terminal that is grounded when MUTE either the telephone rings or during conversation. To connect the Kenwood navigation system, consult your navigation manual. Connect either to the power control terminal P.CONT when using the optional power amplifier, or to the antenna control terminal in the vehicle. - Page 40 Connecting Wires to Terminals Connector Function Guide Pin Numbers for Cable Colour ISO Connectors External Power Connector Yellow Blue/White Orange/White Black Speaker Connector Purple Purple/Black Gray Gray/Black White White/Black Green Green/Black English 2WARNING Functions Connecting the ISO Connector The pin arrangement for the ISO connectors depends on the type of vehicle you drive.
-
Page 41: Installation/Removing The Unit
Installation/Removing the Unit Installation Metal mounting strap (commercially available) Firewall or metal support Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Self-tapping screw (commercially available) Screw (M4X8) (commercially available) ⁄ •... -
Page 42: Removing The Unit
Installation/Removing the Unit Removing the hard rubber frame Engage the catch pins on the removal tool and remove the two locks on the upper level. Upper the frame and pull it forward as shown in the figure. Accessory2 Removal tool When the upper level is removed, remove the lower two locations. -
Page 43: Troubleshooting Guide
Troubleshooting Guide Some functions of this unit may be disabled by some settings made on this unit. Cannot switch to Aux source. • AUX is not turned on. ☞ <Built-in Auxiliary input Setting> (page 34) • AUX cannot be used when the KCA-iP200 is connected. - Page 44 • The file system of the connected USB device is broken. ➪ Copy the files and folders for the USB device again referring to http://www. kenwood.com/usb/. If the error message is still displayed, initialize the USB device or use other USB devices. Error 05: The disc is unreadable.
- Page 45 USB again. N/A Device: An unsupported USB device is connected. ➪ For the supported USB devices, refer to <http://www.kenwood.com/usb/>. No Music Data/ Error 15: • The connected USB device contains no playable audio file. • Media was played that doesn’t have data recorded that the unit can play.
-
Page 46: Specifications
: Below Measurable Limit Frequency response (±1 dB) : 10 Hz – 20 kHz Total harmonic distortion (1 kHz) : 0.008 % (KDC-W7537U/W7537UY) : 0.010 % (KDC-W7037/W7037Y) Signal to Noise ratio (1 kHz) : 110 dB (KDC-W7537U/W7537UY) : 105 dB (KDC-W7037/W7037Y) Dynamic range...